Your reception team often has to seat two visitors while keeping a conversation area open, so a lobby and guest chairs - wood set needs to do more than fill unused space. In reception areas and lounges, this three-piece set places two upholstered chairs with a connecting center table. The Wallsaver design protects walls from being scraped or gouged, while the generous space between seat and back leaves room for cleaning. Your staff can also work from a stated weight capacity of 300 pounds per seat when planning visitor seating. That matters when visitors arrive at different times and your front desk cannot reserve a separate seat for every conversation throughout the day.
The chairs use hardwood construction with a lacquer finish, upholstered seat and back cushions, and a Matrex seat support system. The center table combines a high pressure laminate insert with solid hardwood edge rails. Overall dimensions are 65-inch wide by 23 1/2-inch deep by 34-inch high. Each seat has a weight capacity of 300 pounds. Seat height is 18-inch and armrest height is 25-inch in front and 24 1/4-inch in back. These dimensions give you the measurements needed to review the placement of the set within your reception or lounge.
For your final specification, choose from five polyurethane upholstery colors, Walnut or Mahogany finish on the frame, and Earthen Twill or Graphite Twill laminate for the table. The set's contemporary geometric styling includes a chamfered edge under the armrest, while the front and rear armrest measurements give you separate reference points for planning clearance. In a reception area or lounge, you can use the 65-inch overall width and 23 1/2-inch overall depth to review placement before ordering. The three-piece arrangement, wall-protecting feature, and stated per-seat capacity keep the relevant planning details in one place. This set is made in the USA.