If your corner holds active equipment, this desk uses three motors and a curved interior corner. This L-shaped format lets you bring the full work area with you as you move between sitting and standing, rather than leaving monitors and equipment behind. The curved interior corner uses the space where your return meets the main run, giving you a place to work into the corner while keeping the desk's L-shaped arrangement in view. With a programmable one-touch keypad, you can set preferred heights and move the desk up or down as your day changes.
Under the top, the three-motor, three-stage legs raise and lower the entire L-shaped desk. The system is rated to lift and lower up to 310 pounds of equipment on your desktop. A programmable keypad controls the movement and lets you store preferred settings. The tops are one inch thick laminate. Overall dimensions are 72 inches wide by 78 inches deep by 50 1/2 inches high, so you can check the footprint and maximum listed height against your room and circulation plan.
For the final configuration, you choose among several laminate top colors and two metal leg colors, then specify whether the return should be on the left or right. The desk is not reversible, so that return decision belongs in your order and floor plan before you place it. Because the height mechanism moves the entire L-shaped desk, your monitors, documents, and other equipment can remain on the work area as you change positions, subject to the 310-pound equipment rating. The curved interior corner gives the user side a way to work into the corner while using the L-shaped footprint. During a day that shifts between seated concentration, standing calls, and shared review, the programmable keypad gives you repeatable access to the heights you have selected. You are choosing a workstation that keeps the sitting-to-standing change tied to the whole desk, with the finish and return orientation set to match your room.
Ships ready for easy assembly.