Long corner days fit this desk with three motors rated to raise and lower 310 pounds of equipment. A standing desk - electronically adjustable, built as a 90-degree corner L desk, lets the entire L-shaped desk raise and lower with your work in place. Its 3 motor, 3 stage legs adjust the work surface from 24 1/2 inches to 50 inches high, allowing you to change positions throughout the day without leaving the equipment assigned to that workstation behind. For teams managing shared work areas, that means the desk supports active working while keeping the full corner layout together.
The overall dimensions are 66-inch wide by 72-inch deep by 50-inch high. The laminate tops are 1-inch thick and finished with 3 millimeter edge banding. The three motor, three stage leg system is rated to lift and lower up to 310 pounds of equipment on your desktop, giving you capacity for monitors and other workstation equipment. A programmable electronic one-touch height adjustment keypad lets you program your preferred settings and move the desk up or down at the touch of a button. Because the entire L-shaped desk raises and lowers, the adjustment applies across the connected corner configuration.
You can configure the desk with several laminate top colors and several laminate finishes, along with your choice of two metal leg colors. The 90-degree corner arrangement uses the available office corner for an L-shaped workstation, while the 24 1/2-inch to 50-inch height range gives you seated and standing positions to program at the keypad. Set your preferred settings once, then use the one-touch control as your workday changes. The result is a workstation that keeps your monitors, equipment, and active files together as you move between positions, with the dimensions and finish selections needed to coordinate it with your office.
Ships ready for easy assembly.