When supplies must move between lab stations, you need a mobile demo cart for Science & Lab Tables that can transport equipment and supplies between work areas. This cart gives you a 36-inch wide by 24-inch deep footprint and a 30-inch height to plan around. In a working laboratory, every trip can compete with experiments, instruction, preparation, or cleanup, and an improvised carrying arrangement can leave supplies spread across the route. A cart that can move with the work keeps that requirement visible: you can position equipment where it is needed, then move it back when the task is complete. The relevant question is whether the unit's construction, capacity, and mobility match the loads and paths your team handles.
Constructed of solid oak and oak veneers, the cart has a 1 1/4-inch ChemGuard top and an oak plywood shelf. Its 500-pound weight capacity gives you a stated limit for the equipment and supplies you place on it; that figure should be considered alongside the combined load of your setup. Three-inch ball bearing locking swivel casters allow the unit to roll, and the locking feature lets you keep the cart in position when you are working at a station. The top thickness is 1 1/4 inches, while the shelf is identified specifically as oak plywood, so each material statement stays tied to the component named. The overall dimensions are 36-inch wide by 24-inch deep by 30-inch high, information you can use when checking clearances, storage locations, and routes between rooms.
Because your lab may serve different rooms, the cart's mobility matters beyond the initial placement. The 3-inch casters are locking swivel casters with ball bearings, and you can use that specification when coordinating movement through your facility. The cart requires minor assembly, so account for that step before it enters service. Its solid oak and oak veneer construction, ChemGuard top, and oak plywood shelf give you a clear list of the specified materials and components to review with your team. Call for quantity discounts when outfitting multiple work areas. Before ordering, compare the 36-inch width, 24-inch depth, 30-inch height, and 500-pound weight capacity with your intended equipment, route, and storage location. That check connects the cart's published specifications to the way your laboratory actually operates. PLEASE CALL FOR QUANTITY DISCOUNTS