When your work area needs a seat that can change height for different users, a kitchen stool with an adjustable 19-inch to 27-inch seat height lets you set the seating level to the person using it. That matters when one counter, workstation, or service area serves people who do not share the same reach or posture. You can select a position within this stated range for the task in front of them. The 14-inch seat diameter also gives you a specific footprint to consider when planning clearances around counters and work surfaces. For an office break area, staff kitchen, training room, or other seated work zone, those measurements give you concrete criteria before you order.
The seat measures 14 inches in diameter and contains an 11 1/2-inch-diameter masonite board recessed into the pan. That board is specified not to chip or crack. Eight rivets on the seat are specified to prevent warping. The stool uses 18-gauge, 7/8-inch steel tubing. Footrings measure 5/8 inch outside diameter; they are welded to each leg with four contact points at each leg. Height adjustment uses chrome-plated adjustable-height inserts. These are the construction details you can review against your facility's use: the seat and recessed board define the sitting surface, the rivets address the stated warping concern, and the welded footrings provide the documented leg connection points. The measurements are stated component by component so you can compare the stool with available counter clearance and the way your team will use the seat.
For placement planning, the listed height is 27 inches, while the seat height adjusts from 19 inches to 27 inches. Use the seat-height range when you are matching the stool to a counter or work surface, and use the listed height when you are checking the room's vertical clearance. The chrome-plated inserts identify the specified adjustment component, while the 14-inch seat and masonite board identify the seat construction. This stool lets you establish a repeatable selection process: identify the user and surface, choose a seat height from the stated 19-inch to 27-inch range, then check the 14-inch diameter against the location. Those checkpoints keep your purchasing decision tied to the dimensions and construction listed here.