A conference room with uneven floors uses a table whose silver cast-iron base has leveling glides and 1.25-inch laminate. This conference table measures 36 inches high, with an overall width of 72 inches and depth of 36 inches. Its round-base configuration gives you a clear starting point for planning meeting space, circulation paths, and the placement of nearby furniture. The counter-height format also establishes a specific 36-inch elevation for your room plan.
The top is 1 1/4 inches thick and made from high pressure laminate, with an edge that will not crack or peel. The round base is solid cast iron and silver. Its steel has a 3-inch diameter and is made of 16 gauge steel. Leveling glides help prevent the table from wobbling on uneven floors, allowing you to account for floor variation where it affects the table. Overall dimensions are 36 inches high by 72 inches wide by 36 inches deep. The 36-inch height is the stated counter height, giving you a documented measurement when coordinating the table with surrounding furnishings. This conference table is made in the USA.
For your purchasing review, the configuration is direct: a 72-inch-wide by 36-inch-deep conference table, 36 inches high, with a silver round base. Those overall dimensions give you measurements to compare with room clearances, walking paths, and nearby work areas before you finalize the layout. The high pressure laminate top identifies the material at the working surface, while the stated edge construction addresses the edge specifically. Leveling glides let you account for uneven flooring at the table's base. With its 1 1/4-inch-thick top, solid cast iron round base, 3-inch-diameter 16 gauge steel, silver base, and made-in-USA construction, you can evaluate the table against the actual requirements of your conference room.
Ships ready for easy assembly.