Your office layout has to account for how teams occupy space, especially when panel runs meet at a corner. For cubicles built with 42-inch high panels, this connector joins two panels at 90 degrees. That gives you a specific connection point to consider while you map workstations, review circulation, or coordinate a change to an existing panel arrangement. Instead of leaving the corner relationship to guesswork, you can evaluate the panel height and angle together before finalizing the layout.
The specification is direct: the 2 way corner connector connects two 42-inch high panels at 90 degrees. The panel count is two, and the connection angle is 90 degrees; those are the stated parameters for this component. As you review a plan for cubicles, use these facts to check whether the panels in the intended location match the connector's stated requirements. This keeps your planning language tied to the supplied panel height and connection angle rather than assumptions about other heights, angles, materials, or features. Record the intended panel locations and confirm that each corner using this component follows the same two-panel, 90-degree arrangement.
Your final review can focus on where the panel runs meet, whether each planned corner uses two 42-inch high panels, and whether the angle is 90 degrees. The connector gives you a clear item to identify in the layout schedule and purchasing notes, so the intended locations can be discussed using the same panel height and angle. If your team revises the floor plan, carry those two requirements into the updated corner list. For an office manager or facility director, that record keeps the product's role tied to the physical panel arrangement you are approving: two 42-inch high panels connected at 90 degrees. Review the plan, verify the stated configuration, and place this component where that arrangement is required.