When your lab needs a dedicated place for experiments, a science and lab table becomes part of how you separate active work from crowded shared surfaces. You are managing equipment, materials, and multiple users in the same room, often while keeping each setup within a fixed footprint. This table is specified at 60 inches wide by 24 inches deep by 30 inches high, with a ChemGuard top and non-skid adjustable glides for precise leveling. For a lab manager, the decision is tied to your room dimensions, the number of stations you need, and the way users move around them. The rubber leg boots also account for the contact points between the table and your floor, keeping the configuration focused on the working environment rather than only the tabletop.
The legs are constructed of solid red oak, smoothly machined, and finished with acrylic finish. The aprons are constructed of solid oak and measure 13/16-inch deep by 4 1/2-inch high. Each apron includes 13 gauge steel corner braces, while the 2 1/2-inch square solid oak legs have 5/16-inch hanger bolts installed. Nuts and washers are supplied for attaching the legs to the aprons. The non-skid adjustable glides provide precise leveling, and rubber leg boots are included at the legs. The ChemGuard top is screwed to the table, keeping the listed top, apron, leg, brace, hardware, and floor-contact components tied to their specific functions. You can review these dimensions and materials against your room plan before assigning the table to a lab zone or instructional station.
Your configuration includes the ChemGuard top, solid red oak legs, solid oak aprons, 13 gauge steel corner braces, non-skid adjustable glides, and rubber leg boots. The 60-inch width and 24-inch depth give you a stated footprint to compare with aisles, casework, and adjacent tables, while the 30-inch height establishes the table's vertical placement in the room. If you are planning several stations, call for quantity discounts. This science and lab table gives you a clearly specified combination of top, frame components, leveling hardware, and dimensions to evaluate against the way your facility uses its lab space. PLEASE CALL FOR QUANTITY DISCOUNTS