A lab bench that stays busy needs a table balancing a plastic laminate top on oak legs and boots. This science and lab table gives you a dedicated laboratory work surface for tasks that cannot be left on administrative desks. The plastic laminate top supplies that specified surface, while the table's 60-inch width, 30-inch depth, and 30-inch height let you plan placement around equipment and circulation paths. If your team is adding stations or replacing improvised workspaces, these dimensions give you concrete information for reviewing available floor area before you order. That distinction matters when staff move between specimen handling, note-taking, and recordkeeping, because the available surface is carrying more than one kind of work.
The table measures 60 inches wide, 30 inches deep, and 30 inches high. Its legs and aprons are constructed of solid red oak, with each apron measuring 13/16-inch deep by 4 1/2-inch high. The aprons use 13 gauge steel corner braces, while the 2 1/2-inch square solid oak legs have 5/16-inch hanger bolts installed and attach to the aprons with supplied nuts and washers. The legs and aprons receive an acrylic finish. The plastic laminate top is screwed to the table at the factory, keeping that top-to-table connection part of the specified construction. These details give you specific information to review alongside your room's intended use and maintenance planning.
For the floor contact points, non-skid adjustable glides are provided for precise leveling, and rubber leg boots are included. The configuration remains tied to the listed 60-inch width, 30-inch depth, 30-inch height, plastic laminate top, solid red oak legs and aprons, and acrylic finish on those wood components. If you are planning several stations for one room, call for quantity discounts as you build the order. Review clearances, equipment placement, and staff movement against the stated dimensions so the table fits the work pattern you are responsible for managing. PLEASE CALL FOR QUANTITY DISCOUNTS